Induction

NHRA Pro Stock

Holley Pro Stock Electronic Fuel Injection Debuts at Winternationals

February 13, 2016 @ 3:05 pm
by Administrator
Comments are off for this post.
Anticipation finally crested as the NHRA Pro Stock entries began qualifying for the Circle K NHRA Winternationals on February 12th. Day one was a success as a full field of 16 cars showed up to qualify. All but one car made successful qualifying runs and indications point to some close racing...
hemi

Fabricating a Single Plane Hemi Intake

January 1, 2016 @ 11:07 pm
by Administrator
Comments are off for this post.
This is how hot rodders used to build the parts they needed back in the day. Its still happening today as the pioneering old timers and new young guns join forces to build powerful new pieces that other hot rodders can use. That's quite encouraging, not just for Hemi fans, but for hot rodding itself.
Hemi

Early Hemi Single Plane 4V Intake Test

December 28, 2015 @ 4:15 pm
by Administrator
Comments are off for this post.
Legendary racer and engine builder Gene Adams has been one of the most successful navigators of the Hemi's long progression of power. Most Hemi race engines were either supercharged for dragster or Gasser racing or outfitted with dual four barrel carburetors for Super Stock racing...

Dart Reveals New Billet LS Cylinder Head

December 16, 2015 @ 4:33 pm
by Administrator
Comments are off for this post.
Dart Machinery has revealed some details of its forthcoming all-new billet LS cylinder head which breaks new ground by coming with full water jacketed cooling. Its the last of the OEM level pushrod style engines that offers grass root enthusiasts...
RTS PD Valve

RTST Ported Flow Testing Valves

June 14, 2015 @ 6:47 pm
by Administrator
Comments are off for this post.
The RTS kit permits precise mapping of the airflow values around the circumference of the valve at any lift value. It helps identify shrouded...
Supercharger

Supercharged! Design, Testing and Installation of Supercharger Systems

May 28, 2015 @ 8:12 am
by Administrator
Comments are off for this post.
Corky Bell is widely acknowledged for his expertise in turbocharging and supercharging. His new…

Factory 409 Fuel Injection: No Really!

May 22, 2015 @ 1:56 am
by Administrator
Comments are off for this post.
Factory 348ci and 409ci Chevrolet engines were never equipped with OEM fuel injection, but that doesn't mean it never existed. In a bid to improve power and economy, GM did extensive research on fuel injection for W-motored cars and trucks back in the day. This research was conducted in the late fifties as you will note...
MSD

MSD Atomic AirForce Wow’s SEMA

November 9, 2014 @ 5:46 pm
by Administrator
Comments are off for this post.
MSD's new series of Atomic AirForce intake manifolds opened a lot of eyes at the 2014 SEMA Show. The new intake systems were thoroughly researched and painstakingly developed to deliver improved airflow to both stock and modified LS-series...
LS3 super voctir

New Edelbrock LS3 Super Victor Intakes

July 6, 2014 @ 1:18 pm
by Administrator
Comments are off for this post.
Edelbrock announced the release of its new Super Victor intake manifold for Chevy LS3 engines. The new Super Victor intake manifolds are designed for use on Gen IV LS series engines equipped with LS3 cylinder heads...