Intake Manifolds

Sonnys Racing

How To Build Racing Engines: Choosing the Right Induction System

February 23, 2016 @ 6:14 pm
by Administrator
Comments are off for this post.
Intake manifold characteristics and dimen­sions exert considerable influence on engine performance with respect to power band shape and positioning on the RPM scale. Race applications deal with three basic manifold types: dual-plane intakes, single-plane intakes, and tunnel ram intakes...
hemi

Fabricating a Single Plane Hemi Intake

January 1, 2016 @ 11:07 pm
by Administrator
Comments are off for this post.
This is how hot rodders used to build the parts they needed back in the day. Its still happening today as the pioneering old timers and new young guns join forces to build powerful new pieces that other hot rodders can use. That's quite encouraging, not just for Hemi fans, but for hot rodding itself.
Hemi

Early Hemi Single Plane 4V Intake Test

December 28, 2015 @ 4:15 pm
by Administrator
Comments are off for this post.
Legendary racer and engine builder Gene Adams has been one of the most successful navigators of the Hemi's long progression of power. Most Hemi race engines were either supercharged for dragster or Gasser racing or outfitted with dual four barrel carburetors for Super Stock racing...
lingenfelter

Lingenfelter C7 Intercooler Manifold

November 12, 2015 @ 11:52 pm
by Administrator
Comments are off for this post.
Lingenfelter Performance Engineering's liquid to air intercooler intake manifold for turbocharged or centrifugal supercharged 2014-2015 C7 Corvettes with the LT1 engine offers a unique combination of performance enhancements...
MSD

MSD Atomic AirForce Wow’s SEMA

November 9, 2014 @ 5:46 pm
by Administrator
Comments are off for this post.
MSD's new series of Atomic AirForce intake manifolds opened a lot of eyes at the 2014 SEMA Show. The new intake systems were thoroughly researched and painstakingly developed to deliver improved airflow to both stock and modified LS-series...
LS3 super voctir

New Edelbrock LS3 Super Victor Intakes

July 6, 2014 @ 1:18 pm
by Administrator
Comments are off for this post.
Edelbrock announced the release of its new Super Victor intake manifold for Chevy LS3 engines. The new Super Victor intake manifolds are designed for use on Gen IV LS series engines equipped with LS3 cylinder heads...

Edelbrock’s New BBC Victor Tunnel Ram

April 20, 2014 @ 11:50 pm
by Administrator
Comments are off for this post.
Edelbrock's new Victor Tunnel Ram is a modern updated design to its very successful Victor Ram 2-R Tunnel Ram, first released over 35 years ago. It's designed for use with 468-582 c.i.d. standard-deck Chevrolet V8 engines with conventional...

Kaase Racing Engines Debuts P-38 Cross Ram Induction System

November 30, 2012 @ 5:11 pm
by Administrator
Comments are off for this post.
Jon Kaase Racing engines has debuted its new Ford Windsor P-38 cross-ram induction system incorporating a unique low profile that assures top tuned length performance with desirable hood clearance. The new intake is specifically tuned for a driving range between 2500 to 6800 RPM with between 2500 to 6800 RPM with most OEM and aftermarket performance cylinder heads and...

Holley Hi–Ram Intake for Cathedral Port LS1 LS6 and Rectangle Port LS7 GM Engines

July 20, 2012 @ 7:39 pm
by Administrator
Comments are off for this post.
Holley's cast aluminum Modular Hi-Ram™ Intake System is now available for GM LS1/LS2/LS6 cathedral port engines and GM LS7 engines. The Hi-Ram modular intake was originally introduced for LS3/L92 rectangle port engines as a cost effective alternative to...