New Products

ARP Metric bolts

ARP Expands Metric Bolt Selection

June 13, 2017 @ 9:37 pm
by Administrator
Comments are off for this post.
Automotive Racing Products, ARP, has grown its selection of “bulk” metric bolts to cover sizes from very tiny M6 with a 12mm underhead length to a large M12 x 100mmn UHL offering. The M6 bolts are made with a 1.00 pitch count, the M8 fasteners have a 1.25 count, M10s come...
weisco boostline rod

Wiseco’s New Boostline Connecting Rods

December 11, 2016 @ 9:40 pm
by Administrator
Comments are off for this post.
Weisco's new extreme duty BoostLine connecting rods are designed for up to 2000 horsepower applications in boosted domestic V8s and an large assortment of imports as well. The rods are intended for extreme duty, highly boosted applications and...
aeromotive

Aeromotive’s New EFI to Carb Regulator

December 9, 2016 @ 6:50 pm
by Administrator
Comments are off for this post.
Aeromotive’s New EFI to Carb Regulator (P/N 13220) allows any car or truck, originally equipped with a return-style EFI-powered engine, to affordably convert to a standard carburetor while retaining the full, stock EFI fuel system components...
burns stainless

Burns Stainless Introduces Innovative Technology with Gill Sensors & Controls

December 7, 2016 @ 6:58 am
by Administrator
Comments are off for this post.
Burns Stainless introduces new innovative sensor technology with Gill Sensor and Controls; currently a supplier to European motorsports including Formula One, Rally Car and the World Endurance Championships.
stealth terminator

All New Terminator Stealth EFI from Holley

December 6, 2016 @ 10:59 pm
by Administrator
Comments are off for this post.
Holley Performance Products is pleased to announce its all-new Terminator Stealth EFI, which provides the classic, traditional look of a carburetor with all the tunability and drivability of electronic fuel injection. Terminator EFI will support any engine with a...
GST seals

One-Piece Rear Main Seals for Big Block Chevys

September 2, 2016 @ 5:27 pm
by Administrator
Comments are off for this post.
Rear main seal leakage remains a problem on engines that still use 2-piece rear main seals. We all know the time honored method of offsetting the seal parting lines so they do not match the main cap to block interface...

Koul Tools Braided Hose Assembly Kits

May 28, 2016 @ 6:16 pm
by Administrator
Comments are off for this post.
Koul Tools hose end assembly kits have been on the market for some time, but its amazing how many people still don't take advantage of them ...

Earl’s New Vapor Guard Hose and Fittings

May 10, 2016 @ 5:58 pm
by Administrator
Comments are off for this post.
Earl's new Vapor Guard hose and hose ends provide a complete, economical solution that virtually eliminates fuel permeation issues common with...

Holley’s Billet Remote Oil Filter Mount

April 15, 2016 @ 10:16 am
by Administrator
Comments are off for this post.
Holley Performance Products is pleased to announce all-new Billet Remote Oil Filter Mounts from Earl's. These remote mounts make it a snap to relocate your oil filter to any easy-to-reach location under the hood. Constructed of billet 6061-T6 aluminum and anodized black, they feature dual -10 AN O-ring port inlet and outlets – two on each side – for endless routing options. One of the extra ports can be used to attach a mechanical oil temperature gauge using Earl's adapter part # 981470ERL.

Racepak IQ3D Drag Logger Dash

February 26, 2016 @ 12:55 pm
by Administrator
Comments are off for this post.
Racepak has introduced its new IQ3D Drag Logger Dash. The IQ3D is designed for the sportsman drag racer looking for a compact, all-in-one solution for data logging and instrumentation. It eliminates the need for an external data logger, and features ...
Holley

Holley Vintage Series SBC Valve Covers and Air Cleaners

February 1, 2016 @ 8:16 pm
by Administrator
Comments are off for this post.
Holley Performance Products new Vintage Series air cleaners and small block Chevrolet valve covers are available in as cast, satin black with machined fins, and polished finishes for vintage applications...

PerTronix New Contour Starters

January 27, 2016 @ 7:40 pm
by Administrator
Comments are off for this post.
PerTronix new Contour starters combine form and function with a fully enclosed solenoid protecting key components from the elements and damaging heat. These starters look great on street rods and other vehicles where the engine is exposed...
Hemi

Early Hemi Single Plane 4V Intake Test

December 28, 2015 @ 4:15 pm
by Administrator
Comments are off for this post.
Legendary racer and engine builder Gene Adams has been one of the most successful navigators of the Hemi's long progression of power. Most Hemi race engines were either supercharged for dragster or Gasser racing or outfitted with dual four barrel carburetors for Super Stock racing...

Dart Reveals New Billet LS Cylinder Head

December 16, 2015 @ 4:33 pm
by Administrator
Comments are off for this post.
Dart Machinery has revealed some details of its forthcoming all-new billet LS cylinder head which breaks new ground by coming with full water jacketed cooling. Its the last of the OEM level pushrod style engines that offers grass root enthusiasts...

Moroso Releases New LS Oil Pans and Supporting Components

November 17, 2015 @ 3:05 pm
by Administrator
Comments are off for this post.
lingenfelter

Lingenfelter C7 Intercooler Manifold

November 12, 2015 @ 11:52 pm
by Administrator
Comments are off for this post.
Lingenfelter Performance Engineering's liquid to air intercooler intake manifold for turbocharged or centrifugal supercharged 2014-2015 C7 Corvettes with the LT1 engine offers a unique combination of performance enhancements...
ZZ6 small block

Chevy’s New 405 HP ZZ6 Smallblock

October 11, 2015 @ 3:26 pm
by Administrator
Comments are off for this post.
Chevrolet introduces the newest member of the small-block family, the ZZ6 Turn-Key crate engine. Delivering a solid 405 horsepower and 406 lb-ft of torque at 4,600 rpm, the ZZ6 remains a solid competitor...
boost lock

New Boost Lock Prevents Boost Loss

October 9, 2015 @ 12:22 am
by Administrator
Comments are off for this post.
Boost Lock is an innovative new product specifically designed to prevent the separation of inlet boost tubes under high boost conditions. When this occurs during a race you lose...
holley carburetor

Holley Acquires MSD

September 23, 2015 @ 3:32 pm
by Administrator
Comments are off for this post.
Holley Performance Products is pleased to announce the acquisition of the El Paso, TX based MSD Group. The MSD Group includes iconic brands such as MSD, Mr. Gasket...
e85-Holley

Holley Ultra HP Now For E85

June 16, 2015 @ 1:00 am
by Administrator
Comments are off for this post.
Holley has raised the bar on E85 race carburetors. Holley's popular 4150 Ultra HPs are now available with components and calibrations making them ready for ethanol. They’re available in 600, 650, 750, 850 and 950 CFM and all come in the exclusive Hard Core Gray hard-anodized finish...
RTS PD Valve

RTST Ported Flow Testing Valves

June 14, 2015 @ 6:47 pm
by Administrator
Comments are off for this post.
The RTS kit permits precise mapping of the airflow values around the circumference of the valve at any lift value. It helps identify shrouded...

Holley Introduces Vent Tube Spill Reduction Valves

April 23, 2015 @ 11:27 pm
by Administrator
Comments are off for this post.
Holley's new Vent Tube Spill Reduction Valves feature an internal valve ball that reduces fuel spillage from carburetor vent tubes in crash situations and reduces fuel slosh from vent tubes during hard launches/stops or while traversing rough terrain in...

Lunati Bootlegger Cams

March 27, 2015 @ 5:04 pm
by Administrator
Comments are off for this post.
The most powerful series of street performance cams ever produced by the Lunati design team. They build on the popular Voodoo® Series, but feature even faster opening rates, a controlled closing and far more area under the lift curve.
Holley Coytote EFI

Holley EFI Harnesses for Ford Coyote and Mod Motors

February 23, 2015 @ 4:25 pm
by Administrator
Comments are off for this post.
Holley has announced the release of plug & play EFI harnesses to use Holley EFI on Ford Coyote and Mod Motor platforms. These plug & play harnesses plug right into your factory sensors, including crank, cam, TPS, coolant, etc. This also includes your...

Melling Debuts “Shark” SBC Oil Pumps at PRI Show

December 5, 2014 @ 3:23 pm
by Administrator
Comments are off for this post.
Melling has re-engineered the traditional small block Chevy oil pump with newly designed asymmetrical helical cut gears. Set to debut at the Performance Racing Industry (PRI) trade show in Indianapolis, the "Shark" pump offers smoother oil flow than a traditional spur gear oil pump along with reduced power requirements and higher volume. The pump still incorporates a cast iron housing that is now equipped with the all new steel helical cut gears.
Holley

High Flow LS Throttle Bodies from Holley

October 28, 2014 @ 9:56 pm
by Administrator
Comments are off for this post.
Holley has released its new high flow throttle bodies for GM LS series engines. These feature-laden throttle bodies are constructed of billet aluminum to provide maximum durability and great looks. They feature a fully adjustable PCV passage valve that permits fine tuning and accommodates...
LS3 super voctir

New Edelbrock LS3 Super Victor Intakes

July 6, 2014 @ 1:18 pm
by Administrator
Comments are off for this post.
Edelbrock announced the release of its new Super Victor intake manifold for Chevy LS3 engines. The new Super Victor intake manifolds are designed for use on Gen IV LS series engines equipped with LS3 cylinder heads...

Edelbrock’s New BBC Victor Tunnel Ram

April 20, 2014 @ 11:50 pm
by Administrator
Comments are off for this post.
Edelbrock's new Victor Tunnel Ram is a modern updated design to its very successful Victor Ram 2-R Tunnel Ram, first released over 35 years ago. It's designed for use with 468-582 c.i.d. standard-deck Chevrolet V8 engines with conventional...
holley carburetor

New Holley Ultra HP 2 Barrel Carbs

April 10, 2014 @ 6:17 pm
by Administrator
Comments are off for this post.
Holley is proud to introduce the all new Ultra HP 2 Barrel. Holley 2 barrels have been a mainstay in oval track racing for decades, but racers always want more. They want more tuning ability, more durability, more weight savings and more features, so Holley listened and designed the all new Ultra HP 2bbl. It delivers the proven results of the Ultra HP 4bbl but...
optima

Smokin’ April Deals on Optima Batteries

April 3, 2014 @ 1:31 am
by Administrator
Comments are off for this post.
Our friends at Optima Batteries are offering a super generous deal on batteries and battery chargers during the month of April. Optima's powerful line of high performance batteries are uniquely suited to the the specialized demands of high...
CP Products

New CP-Carrillo SBC and LS Bullet Rods

March 27, 2014 @ 12:55 am
by Administrator
Comments are off for this post.
Inspired by the top forms of motorsports, our goal is to offer a piston and rod alternative by introducing a high quality product at a affordable price. Extensive research and development along with with centralized manufacturing cells have enabled...
header kit

New Crate Engine “Header Kits” from Burns Stainless

January 31, 2014 @ 9:54 pm
by Administrator
Comments are off for this post.
Burns Stainless LLC Offers Crate Engine “Header Kits” Optimized For Performance Engine swap headers are usually designed for convenience and not performance. Kits include all the items you need to fabricate your custom headers including flanges, mandrel bends, collectors and tabs.

Performance Distributors Releases New GM LS/VORTEC SOS Coils

November 28, 2013 @ 9:36 pm
by Administrator
Comments are off for this post.
Performance Distributors(Davis Unified Ignition) introduces the LS S.O.S.(Sultans Of Spark) ignition coils for GM LS engine applications! New technology in these coils allow you to open up your plug gaps to .065-inch,” burning your fuel more completely and leading to more power and performance. These Davis Unified Ignition S.O.S. coils produce 28,000 volts under load, or your acceleration...

Quick Fuel Technology Introduces New EFI System

November 18, 2013 @ 5:57 pm
by Administrator
Comments are off for this post.
Quick Fuel Technology, known for its innovative carburetors and fuel systems, is introducing QFI – a bolt-on throttle body electronic fuel injection system capable of supporting 500 horsepower. It combines the superior fuel atomization aspects of a carburetor with the precise fuel control of EFI. The patent pending 8-hole annular discharge sleeves inject fuel into a venturi where air speed is at...
holley efi

Holley EFI Shares Data with Racepak Data Systems

November 18, 2013 @ 4:29 pm
by Administrator
Comments are off for this post.
Racers that take advantage of the performance and advanced tuning of Holley’s Dominator or HP EFI systems can now share their EFI operating system parameters with their Racepak data recorders. Being able to record information straight from the ECU provides a long list of important engine data without the need for extra wiring or duplicate sensors...
comp conical springs

Comp Introduces New Conical Valve Springs for High RPM Stability

November 16, 2013 @ 12:46 am
by Administrator
Comments are off for this post.
Expected to become the new standard in high performance valve spring design, COMP Cams® Conical Valve Springs utilize round wire and feature a diameter and progressive pitch driven natural frequency. This design increases the valve train RPM limit while reducing...
Ford Z460 crate engine

Ford Z460 Crate Engine Pumps Big Power

November 14, 2013 @ 10:50 pm
by Administrator
Comments are off for this post.
Ford Racing has taken its Boss Block to the max with the biggest small block Windsor crate engine ever – the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track. The foundation of the Z460 is the legendary Ford Racing Boss block topped off with high port/high flow Z-Heads. Premium components...
FordZ460 short block

Ford Racing Performance Parts Announces New Z460 Short Block

November 14, 2013 @ 8:40 pm
by Administrator
Comments are off for this post.
Ford Racing Performance Parts has taken its line of Boss block based crate engines to the max displacement with the largest small block Windsor short block ever at a whopping 460 cubic inches! With that many cubes to work with, it’s pretty easy to assemble a 550+ horsepower street cruiser...
LS7 cam and heads

New LS7 Cam and Cylinder Head Package for 2010 and later Camaros

November 6, 2013 @ 9:51 pm
by Administrator
Comments are off for this post.
Chevrolet engineers have developed a new cylinder head and camshaft package designed to be a direct replacement for 2010 and later Camaro SS models. The new factory power package revolves around a set of CNC-ported LS3 cylinder heads sporting 2.156/1.590-inch valves...
comp sportsman roller lifters

New Comp Sportsman Solid Roller Lifters

November 6, 2013 @ 8:52 pm
by Administrator
Comments are off for this post.
COMP Cams new Sportsman Lifters are offered in two configurations: a traditional needle bearing axle/wheel design or an optional bronze bushing axle/wheel setup. Each design features two pressurized EDM oil feeds to the axle, along with an edge orifice feed to the wheel. The body design utilizes a skirted wheel that strengthens the lifter ears and also provides more contact area...
ZZ% crate motor

Chevrolet introduces 400 HP ZZ5 Small Block Crate Motor

November 6, 2013 @ 7:54 pm
by Administrator
Comments are off for this post.
Traditional small block Chevy fans just received some love from Chevrolet Performance in the form of an all-new small block Chevy crate motor, the ZZ5 350. Building on the solid foundation of the original 350 HP and 385 HP Z4 engines, Chevrolet engineers groomed more power out of the package with further cylinder head...
COPO 427 crate engine

Chevrolet Expands COPO Crate Engines

November 5, 2013 @ 11:18 pm
by Administrator
Comments are off for this post.
Nov. 4, 2013, SEMA Show, Las Vegas Chevrolet Performance is expanding the COPO engine family with the addition of both 2014 COPO Camaro engines. The current lineup consisting of the popular 7.0L, 427ci and a pair of 5.3L, 327 cubic inch versions is now supplemented by the new COPO 350 and the COPO 396, both naturally aspirated and offering...
jason line pro stock

Jason Line Wins Pro Stock at NHRA Fall-Nationals with Holley Gen-3 Ultra Dominator Carburetors

October 8, 2013 @ 1:24 am
by Administrator
Comments are off for this post.
Jason Line and the team at KB racing in Mooresville, North Carolina, started testing Holley’s new Gen-3 Ultra Dominator carburetor around mid-season, and have since racked up some impressive results, winning the NHRA Fall Nationals and setting low E.T. at the NHRA Midwest Nationals...
quick fuel technology

Coated Carbs for Cooler Fuel

September 27, 2013 @ 1:38 am
by Administrator
Comments are off for this post.
Quick Fuel Technology™ (QFT) has introduced a highly durable coating that lowers fuel temperatures by 6% to ensure maximum power and response. It is impact and scratch resistant and also resists corrosion from under-hood chemicals and harsh environments found in marine applications or coastal regions. The high performance, high temperature PTFE coating is designed...

Garrett Announces SFI Spec Turbos for Drag Racing

August 16, 2013 @ 5:39 pm
by Administrator
Comments are off for this post.
The introduction of Garrett's new SFI 61.1 Drag Race Spec Turbos is accompanied by a certified conversion program that allows racers to upgrade their current turbos to meet newly formulated SFI specs. The new utrbochargers give racers a choice of bolted inlet flange turbine housings or or available stainless v-band inlet flange turbine housings. The stainless steel v-band inlet housings offer...
Holley Terminator EFI

Holley’s New Terminator EFI System

August 10, 2013 @ 12:24 am
by Administrator
Comments are off for this post.
Holley Performance Products has introduced the new Terminator™ line of carburetor replacement fuel injection systems. Terminator EFI is designed to help enthusiasts easily change from a carburetor to EFI. The Terminator throttle body delivers fuel through an annular discharge ring for excellent...
msd alternator

NEW Racing Alternator from MSD!

February 23, 2013 @ 1:43 pm
by Administrator
Comments are off for this post.
MSD has developed the new DynaForce Racing Alternator. DynaForce Race Alternators are available in two models; 50 Amp and 100 Amp. The 50 Amp model is built in a compact housing and designed for lower demand racing series such as dirt track cars. The 100 amp is designed for drag racing and cars with higher current requirements. Both feature one wire technology...
2013 COPO Camaro

Holley EFI is Standard Equipment on 2013 COPO Camaros

January 3, 2013 @ 1:01 pm
by Administrator
Comments are off for this post.
Holley is pleased to announce that its phenomenal HP EFI engine control unit (ECU) will be offered as standard equipment on all Chevrolet Performance COPO Camaro factory-built race cars in 2013. This is the third Holley brand product to make it onto the COPO Camaro. Holley’s Hi-Ram intake Manifold was standard equipment on all 2012...

Kaase Racing Engines Debuts P-38 Cross Ram Induction System

November 30, 2012 @ 5:11 pm
by Administrator
Comments are off for this post.
Jon Kaase Racing engines has debuted its new Ford Windsor P-38 cross-ram induction system incorporating a unique low profile that assures top tuned length performance with desirable hood clearance. The new intake is specifically tuned for a driving range between 2500 to 6800 RPM with between 2500 to 6800 RPM with most OEM and aftermarket performance cylinder heads and...

Automotive Specialists’ Sealed Racing Engines

September 8, 2012 @ 5:30 pm
by Administrator
Comments are off for this post.
Automotive Specialists, Inc. has developed a new Chevrolet sealed engine utilizing its 46 years of racing engine experience. Their experience building racing engines for the NASCAR Nationwide Series, Truck Series and other top level racing engines helped play an important part in this package. The engine package was carefully designed to ensure durability...
COMP Ultra Pro Magnum™ riocker arms

COMP Ultra Pro Magnum Stud Mount Rocker Arms

August 11, 2012 @ 8:19 pm
by Administrator
Comments are off for this post.
With a nearly unbreakable investment cast 8650 chromemoly body, Ultra Pro Magnum™ Rocker Arms use an arched, web-like design to increase strength & rigidity while reducing the moment of inertia. These unique rockers feature hardened roller tips, an oversized trunion & precision-sorted needle bearings that easily stand up to the abuse of the high load valve springs needed to handle aggressive race applications.

Ross Releases 409 Pistons

August 11, 2012 @ 7:50 pm
by Administrator
Comments are off for this post.
Ross Pistons has released a new piston set for the CHEVY 409s using Edelbrock Performer RPM Cylinder Head in Street / Strip 10.5:1 Compression. Available in + .030 and .040 over, standard 3.500 stroke as well as 4.000 stroke cranks. ROSS 409 Chevrolet pistons are ideal for street/strip applications and are suitable for nitrous systems of 250 HP...

Summit Factory 5 Cobra Engine Combo Kits

August 9, 2012 @ 7:45 pm
by Administrator
Comments are off for this post.
The Summit Racing Equipment/Factory Five Racing Mk4 Roadster is alive and running strong—and now you can duplicate the project with the Summit Racing Factory Five Engine Kit Combos available at SummitRacing.com. The Summit Racing/Factory Five Mk4 Roadster is designed to show enthusiasts how easy it is to put together a killer replica car using a Factory Five kit and parts from Summit Racing’s...
Callies Serialized connecting rod bolt

Callies Introduces Serialized Connecting Rod Bolts

August 4, 2012 @ 7:00 pm
by Administrator
Comments are off for this post.
Callies Performance Products in conjunction with ARP (Automotive Racing Products) has introduced the industries first series of serialized rod connecting rod bolts. With individual bolt serialization engine builders will now be able to record and accurately recall the free length and stretch dimensions of each fastener individually. Produced from Custom Age 625 material these bolts are...

Free Download: Comp Cams 2012 New Products Brochure

July 11, 2012 @ 11:23 pm
by Administrator
Comments are off for this post.
Comp Cams has made their 2012 new products brochure available to all interested parties. It's packed full of Comp's latest high performance products to help you build your engine or high performance car. This new product brief features a ton of new products for GM LS-Series engines and a full range of new and exciting products from all of the companies under COMP's...

Diamond’s New Flat Top and Dished Pistons for GM L92 / LS3 (Camaro)

July 6, 2012 @ 11:12 pm
by Administrator
Comments are off for this post.
Diamond Pistons has announced two new pistons—flat tops and dished—for Chevy L92 / LS3 engines (Camaro). Suitable for use in virtually every segment of the aftermarket, including restoration, street-strip, pro-touring, and off-road, these these new 2618 conventional forgings are supplied with alloy steel 8620 piston pins and spiral locks as well as a standard ring package, comprising...

New “Low Restriction, Cooler Temperature” A/F Sensor Boss

July 5, 2012 @ 10:41 pm
by Administrator
Comments are off for this post.
Performance Trends has developed a new style weld-able “boss” or “bung” for A/F sensors (wide band O2 sensors). This innovative new part is designed with small external cooling fins and extra depth to help keep he A/F sensor cooler (good for high temp turbo applications) and out of the flow (to provide lower restriction). The part number is...

Graymills Ultrasonic Parts Washers To Fit Any Budget

June 19, 2012 @ 11:38 pm
by Administrator
Comments are off for this post.
Graymills has added the BTV Series to its expanding group of Ultrasonic Parts Washers. With this new, economical series, we are adding a small benchtop line for use in maintenance/service areas that have challenging, small parts to clean yet be able to meet tight budgets. The BTV Series of parts washers is ideal for tight, job site or "cell" cleaning applications ...
Goodson Valvespring Bench

Goodson Valve Spring Bench

June 19, 2012 @ 11:29 pm
by Administrator
Comments are off for this post.
Designed to work with virtually any cylinder head, units available in pneumatic and manual models Goodson offers a wide range of valve spring compressors including two top-of-the-line valve spring benches. The pneumatic model (PSB-5000) is designed to work on virtually any multiple valve head and is ideal for heads with recessed springs. A key feature is the pneumatic valve support that holds...
Trend Hard Tip Pushrod

Trend Performance New Hard-Tip Self-Lubricating Pushrod

June 19, 2012 @ 11:01 pm
by Administrator
Comments are off for this post.
Trend Performance has introduced what they believe to be the world’s first self-lubricating 5/16˝ hard-tip competition pushrods. While their lower ends, those that engage the lifter seats, remain unaltered their upper ends now feature self-lubricating tool steel tips hardened to 60Rc. Both 5/16˝ diameter ball ends are formed with a 210-degree 210-degree radius at the end of a 1-5/8˝ taper to...